Kubota DPF Emulator Plug & Play

DPF Emulator for Kubota engines. Plug and Play Delete Kit for Kubota engines in Kubota machines and any other brand fitted with Kubota engine.

We support all Kubota engines, V1505, D1803, V2403, V2607, V3307, V3800, V6108.
Basically, if you have a Kubota engine then we have an emulator for you.

No nonsense old fashioned reprogramming, no ECU shipping, no meddling with machine software, completely safe to the engine, fully and easily reversible. Just plug and play. You get the emulator that’s ready to go and hook it up using original plugs. No need to take the ECU out of the machine, no need for a computer, no reprogramming. Kubota DPF Emulator. Plug & Play. It’s that simple.

Tractors, skid steers, mowers, excavators, mini excavators, compact track loaders, generators, backhoe loaders, telehandlers, rollers, forklifts.
This Kubota DPF Emulator & Kubota DEF Emulator fits Kubota machines like Kubota SVL95-2s & Kubota SVL97-2s skid steers but also tractors like Kubota M5-091 and Kubota M5-111 and many more…
It’s all about the engine and our Kubota DPF Emulator as well as Kubota DEF emulator cover all engines.

• Kubota DPF Emulator – Plug & Play Kubota DPF Emulator – All you have to do to install this Kubota DPF Emulator is to disconnect the temperature sensors, pressure sensor and common rail.
  Then plug the emulator instead of the sensors… and that’s it.
  No reprogramming, no ECU shipping.
  Just hook it up and you’re good to go.
• Kubota DEF Emulator – Plug & Play Kubota Emulator – Offers the full functionality of the Kubota DPF Emulator + it also offers DEF Delete.
• “Does that mean I have to ship you my ECU?” – absolutely not!
  No ECU shipping required, no reprogramming, fully Plug and Play.
• Same as with Kubota DPF Emulator – you disconnect temperature sensors and pressure sensor, additionally you disconnect the two NOx sensors and the ACM.
  
• The next step is to connect our Kubota emulator, the original plugs we use fit your machine, just hook it up.
  
• The next step is to enjoy your deleted machine. No reprogramming, no ECU shipping, that’s it.
  Your machine is free from DPF and DEF issues.
  

The DPF emulator simulates the operation of a fully operational exhaust gas reduction system. Thanks to Kubota DPF Emulator, the engine controller does not activate regeneration of the diesel particulate filter, because it receives information that the DPF filter is in perfect condition. It means that all the time, the filter is clean.

In addition, in engines equipped with a Selective Catalytic Reduction system (SCR system), the diesel exhaust fluid (DEF) does not need to be replenished. The Emulator will emulate (imitate) the fluid level, making the ECU think that there’s still fluid in the tank.

Kubota DPF Emulator & Kubota DEF Emulator emulates (simulate/imiate) the operation of the following components:

• Temperature sensors (there are three)
• DPF pressure sensor (the differential pressure sensor – it measures the pressure before and after the filter)
• DEF/AdBlue pump (Diesel Exhaust Fluid = AdBlue)
• NOx sensors (NOx = Nitrogen Oxides)
• DEF tank
• DEF sensors

Installation of our emulator is simple and does not require interference with the engine controller. The Kubota DPF Emulator uses a harness with original plugs, which must be connected in place of the sensors. Installation takes only a few minutes.

Once the unit has been connected using the factory plugs, the errors usually need to be cleared. It often happens that the machine will come out of power limitation mode after a few minutes of operation. This depends on the level of soot fill on the DPF filter stored by the Engine Control Unit (ECU).

After installing the emulator, the Kubota engine’s particulate filter must be removed. If you do not want to make a hole in the particulate filter, you can use a straight pipe. We offer a straight pipe to replace the filter.

Each device comes with a detailed instruction manual with a description of the steps to be followed. We provide full post-purchase customer care and tech support. Should any questions regarding the installation of our Kubota DPF Emulator arise our technicians will be happy to help.