Kubota DPF & DEF Delete Kit Easy
DPF and DPF + DEF (SCR) emulators for machines with Kubota engine
Exhaust gas cleaning system emulator for Kubota machines and machines equipped with the engine of this manufacturer. We offer emulators in two versions:
- Kubota DPF Delete Kit
A version of the device designed for Kubota DPF engines equipped only with a diesel particulate filter. - Kubota DPF+DEF Delete Kit
A version of the device designed for Kubota engines equipped with both a diesel particulate filter (DPF) and a selective catalytic reduction (SCR) system with a diesel exhaust fluid tank (DEF/AUS 32/AdBlue).
How does the Kubota DPF Delete Kit work?
The emulator simulates the operation of a fully operational exhaust gas reduction system. Thanks to Kubota DPF Delete Kit, the engine controller does not activate regeneration of the diesel particulate filter, because it receives information that the DPF filter is in perfect condition.
In addition, in engines equipped with a catalytic exhaust gas reduction system, the diesel exhaust fluid (DEF) does not need to be replenished. This is due to the disconnection of the DEF pump, whose operation fully emulates our device.
Kubota DPF Delete Kit simulates the operation of the following components:
- Temperature sensors
- DPF pressure sensor
- SCR pump (DEF only)
- NOx sensors (DEF only)
- DEF tank
- DEF sensors
How to install the Kubota DPF Delete Kit?
Installation of our emulator is simple and does not require interference with the engine controller. The Kubota DPF Delete Kit is equipped with a wiring harness with the appropriate plugs, which must be connected to the indicated locations. Installation takes only a few minutes. Once the unit has been connected using the factory plugs, the errors usually need to be cleared. It often happens that the machine will come out of power limitation mode after a few minutes of operation. This depends on the level of soot filling of the DPF filter stored by the engine controller.
After installing the emulator, the Kubota engine’s particulate filter must be removed. If you do not want to make a hole in the particulate filter, you can use a straight pipe. You will find the straight pipe in our offer.
Each device comes with a detailed instruction manual with a description of the steps to be followed. We provide full after-sales support.
Exemples of machines where you can use Kubota DPF Delete Kit
Kubota excavators:
- Kubota KX040-4
- Kubota KX042-4
- Kubota KX057-4
- Kubota KX080-4
- Kubota KX080-4S2
- Kubota KX121-3
- Kubota U55-4
Kubota loaders:
- Kubota R085
- Kubota R530
- Kubota R630
- Kubota SSV65
- Kubota SSV75
- Kubota SVL65-2
- Kubota SVL75-2
- Kubota SVL90-2
- Kubota SVL95-2S
- Kubota SVL97-2S
Kubota tractors:
- Kubota B3350
- Kubota F3990
- Kubota L3301
- Kubota L3560
- Kubota L3901
- Kubota L4060
- Kubota L4760
- Kubota L5460
- Kubota L6060
- Kubota M6060
- Kubota M7060
- Kubota M8560
- Kubota M9960
- Kubota MX4800
- Kubota MX5200
- Kubota MX5800
- Kubota MX6000
Kubota mower:
- Kubota ZD1511
Our solution is also used in other equipment equipped with KUBOTA engines. Among the brands that our emualtor supports you will find: Takeuchi, Caterpilar C3.3, C.3.8, Bobcat and many others. To determine the compatibility with your machine, please check the engine model used in your machine.
Each unit is tested before shipment. We give a 24 month guarantee! Get rid of the DPF now and enjoy the full power of your machine!
When the particulate filter is clogged, a message appears on the dashboard indicating that it needs to be cleaned. Depending on the level of clogging, the machine can perform this procedure itself. If the level of soot or ash saturation is too high, replacement is necessary.
With our solution, you will forget about DPF failures!
Below are photos from the installation Kubota DPF Delete Kit in Manitou machines.